Publikationer

Publikationer av medarbetare på Sports Tech Research Centre

Artiklar i tidskrifter

Ainegren, M. , Jensen, K. & Rosdahl, H. (2018). Breathing resistance in automated metabolic systems is high in comparison with the Douglas Bag method and previous recommendations. Proceedings of the Institution of Mechanical Engineers, Part P, vol. 232: 2, ss. 122-130.  

Pushilina, N. , Panin, A. , Syrtanov, M. , Kashkarov, E. , Kudiiarov, V. , Perevalova, O. , Laptev, R. , Lider, A. & et al. (2018). Hydrogen-induced phase transformation and microstructure evolution for Ti-6Al-4V parts produced by electron beam melting. Metals, vol. 8: 5  

Pushilina, N. , Syrtanov, M. , Kashkarov, E. , Murashkina, T. , Kudiiarov, V. , Laptev, R. , Lider, A. & Koptioug, A. (2018). Influence of Manufacturing Parameters on Microstructure and Hydrogen Sorption Behavior of Electron Beam Melted Titanium Ti-6Al-4V Alloy. Materials, vol. 11: 5    

Olsén, J. , Shen, Z. , Liu, L. , Koptyug, A. & Rännar, L. (2018). Micro- and macro-structural heterogeneities in 316L stainless steel prepared by electron-beam melting. Materials Characterization, vol. 141, ss. 1-7.  

Douglas, T. E. L. , Hempel, U. , Żydek, J. , Vladescu, A. , Pietryga, K. , Kaeswurm, J. A. H. , Buchweitz, M. , Surmenev, R. A. & et al. (2018). Pectin coatings on titanium alloy scaffolds produced by additive manufacturing : Promotion of human bone marrow stromal cell proliferation. Materials letters (General ed.), vol. 227, ss. 225-228.  

Popov, V. , Koptioug, A. , Radulov, I. , Maccari, F. & Muller, G. (2018). Prospects of additive manufacturing of rare-earth and non-rare-earth permanent magnets. Procedia Manufacturing, vol. 21, ss. 100-108.    

Björklund, G. (2018). Shooting efficiency for winners of World Cup and World Championship races in men’s and women’s biathlon: where is the cut-off?. International Journal of Performance Analysis in Sport, vol. 18: 4, ss. 545-553.  

Zhong, Y. , Rännar, L. , Liu, L. , Koptyug, A. , Wikman, S. , Olsen, J. , Cui, D. & Shen, Z. (2017). Additive manufacturing of 316L stainless steel by electron beam melting for nuclear fusion applications. Journal of Nuclear Materials, vol. 486, ss. 234-245.  

Zhong, Y. , Rännar, L. , Wikman, S. , Koptyug, A. , Liu, L. , Cui, D. & Shen, Z. (2017). Additive manufacturing of ITER first wall panel parts by two approaches : Selective laser melting and electron beam melting. Fusion engineering and design, vol. 116, ss. 24-33.  

Andersson, E. , Björklund, G. , Holmberg, H. & Ørtenblad, N. (2017). Energy system contributions and determinants of performance in sprint cross-country skiing. Scandinavian Journal of Medicine and Science in Sports, vol. 27: 4, ss. 385-398.  

Surmeneva, M. A. , Surmenev, R. , Chudinova, E. A. , Koptioug, A. , Tkachev, M. S. , Gorodzha, S. N. & Rännar, L. (2017). Fabrication of multiple-layered gradient cellular metal scaffold via electron beam melting for segmental bone reconstruction. Materials & design, vol. 133, ss. 195-204.  

Rännar, L. , Koptioug, A. , Olsén, J. , Saeidi, K. & Shen, Z. (2017). Hierarchical structures of stainless steel 316L manufactured by Electron Beam Melting. Additive Manufacturing, vol. 17, ss. 106-112.  

Stöggl, T. & Björklund, G. (2017). High intensity interval training leads to greater improvements in acute heart rate recovery and anaerobic power as high volume low intensity training. Frontiers in Physiology, vol. 8    

Chudinova, E. , Surmeneva, M. , Koptyug, A. , Selezneva, I. , Skoglund, P. , Syrtanov, M. & Surmenev, R. (2017). In Vitro Assessment of Hydroxyapatite Coating on the Surface of Additive Manufactured Ti6Al4V Scaffolds. Materials Science Forum, vol. 879, ss. 2444-2449.  

Vladescu, A. , Vranceanu, D. , Kulesza, S. , Ivanov, A. , Bramowicz, M. , Fedonnikov, A. , Braic, M. , Norkin, I. & et al. (2017). Influence of the electrolyte’s pH on the properties of electrochemically deposited hydroxyapatite coating on additively manufactured Ti64 alloy. Scientific Reports, vol. 7: 1    

Klingvall Ek, R. , Hong, J. , Thor, A. , Bäckström, M. & Rännar, L. (2017). Micro- to Macroroughness of Additively Manufactured Titanium Implants in Terms of Coagulation and Contact Activation. International Journal of Oral & Maxillofacial Implants, vol. 32: 3, ss. 565-574.  

Born, D. , Stöggl, T. , Swarén, M. & Björklund, G. (2017). Near-Infrared Spectroscopy: More Accurate Than Heart Rate for Monitoring Intensity in Running in Hilly Terrain. International Journal of Sports Physiology and Performance, vol. 12: 4, ss. 440-447.  

Sundström, D. & Bäckström, M. (2017). Optimization of pacing strategies for variable wind conditions in road cycling. Proceedings of the Institution of Mechanical Engineers, Part P, vol. 231: 3, ss. 184-199.  

Douglas, T. , Hempel, U. , Żydek, J. , Buchweitz, M. , Surmenev, R. , Surmeneva, M. , Koptioug, A. & Pamula, E. (2017). Pectin Coatings on Titanium Alloy Samples Produced by Additive Manufacturing : Promotion of Human Bone Marrow Stromal Cell Proliferation. Engineering of Biomaterials, vol. 143, ss. 43

Ekström, A. , Hafsteinsson Östenberg, A. , Björklund, G. & Alricsson, M. (2017). The effects of introducing Tabata interval training and stability exercises to school children as a school-based intervention program. International Journal of Adolescent Medicine and Health,  

Björklund, G. , Alricsson, M. & Svantesson, U. (2017). Using bilateral functional and anthropometric tests to define symmetry in cross-country skiers. Journal of Human Kinetics, vol. 60: 1, ss. 9-18.    

Sundström, D. (2016). Anpassa farten för snabbare tider. Svensk Idrottsforskning,  

Thor, A. , Palmquist, A. , Hirsch, J. , Rännar, L. , Derand, P. & Omar, O. (2016). Clinical, Morphological, and Molecular Evaluations of Bone Regeneration With an Additive Manufactured Osteosynthesis Plate. The Journal of craniofacial surgery (Print), vol. 27: 7, ss. 1899-1904.  

Koptyug, A. & Burkett, B. (2016). Editorial for the special issue technology for disability sport. Sports Engineering, vol. 19: 3, ss. 139-139.    

Sukhovey, Y. G. , Koptyug, A. , Fisher, T. A. , Petrov, S. A. & Dotsenko, E. L. (2016). Functional Conjugation of the Different Regulatory Responses to the Stress Stimuli in Healthy Human Subjects. Open Journal of Applied Sciences, vol. 6, ss. 489-500.    

Alricsson, M. , Björklund, G. , Ekström, A. & Ostenberg, A. H. (2016). Introducing Tabata intervals and stability exercises in school children by a school-based study. European Journal of Public Health, vol. 26: Issue suppl_1, ss. 417-417.  

Andersson, E. , Holmberg, H. , Ørtenblad, N. & Björklund, G. (2016). Metabolic responses and pacing strategies during successive sprint skiing time trials. Medicine & Science in Sports & Exercise, vol. 48: 12, ss. 2544-2554.  

Koptyug, A. , Rännar, L. , Bäckström, M. & Shen, Z. (2016). New Metallurgy of Additive Manufacturing in Metal : Experiences from the Material and Process Development with Electron Beam Melting Technology (EBM). Materials Science Forum, vol. 879, ss. 996-1001.  

Sundström, D. (2016). On a bioenergetic four compartment model for human exercise. Sports Engineering, vol. 19: 4, ss. 251-263.  

Alricsson, M. , Björklund, G. , Cronholm, M. , Olsson, O. , Viklund, P. & Svantesson, U. (2016). Spinal alignment, mobility of the hip and thoracic spine and prevalence of low back pain in young elite cross-country skiers. Journal of Exercise Rehabilitation, vol. 12: 1, ss. 21-28.    

Ek, R. , Rännar, L. , Bäckström, M. & Carlsson, P. (2016). The Effect of EBM Process Parameters upon Surface Roughness. Rapid prototyping journal, vol. 22: 3, ss. 495-503.  

Hofmann, K. B. , Ohlsson, M. L. , Höök, M. , Danvind, J. & Kersting, U. G. (2016). The influence of sitting posture on mechanics and metabolic energy requirements during sit-skiing : a case report. Sports Engineering, vol. 19: 3, ss. 213-218.  

Hansen, E. , Björklund, G. & Vinberg, S. (2016). Workplace Health Interventions and Physical Fitness Status among Managers of Small-Scale Enterprises in Norway and Sweden. Health, vol. 8, ss. 1697-1712.    

Cronskär, M. (2015). Combined finite element and multibody musculoskeletal investigation of a fractured clavicle with reconstruction plate. Computer Methods in Biomechanics and Biomedical Engineering, vol. 18: 7, ss. 740-748.  

Huo, J. , Derand, P. , Rännar, L. , Hirsch, J. & Gamstedt, E. K. (2015). Failure location prediction by finite element analysis for an additive manufactured mandible implant. Medical Engineering & Physics, vol. 37: 9, ss. 862-869.  

Cronskär, M. , Rännar, L. , Bäckström, M. , Nilsson, K. G. & Samuelsson, B. (2015). Patient-Specific Clavicle Reconstruction Using Digital Design and Additive Manufacturing. Journal of mechanical design (1990), vol. 137: 11  

Cronskär, M. (2015). Strength analysis of clavicle fracture fixation devices and fixation techniques using finite element analysis with musculoskeletal force input. Medical and Biological Engineering and Computing, vol. 53: 8, ss. 759-769.  

Björklund, G. , Holmberg, H. & Stöggl, T. (2015). The effects of prior high intensity double poling on subsequent diagonal stride skiing characteristics. SpringerPlus, vol. 4: 1    

Koptyug, A. , Rännar, L. , Bäckström, M. & Cronskär, M. (2014). Additive Manufacturing for Medical and Biomedical Applications: Advances and Challenges. Materials Science Forum, , ss. 1286-1291.

Sundström, D. , Carlsson, P. & Tinnsten, M. (2014). Comparing bioenergetic models for the optimisation of pacing strategy in road cycling. Sports Engineering, vol. 17: 4, ss. 207-215.    

Bujtar, P. , Simonovics, J. , Koptyug, A. , George, S. & Varadi, K. (2014). Emerging manufacturing bioengineering technologies 2: Scaffold designing experiment using titanium scaffolds. British Journal of Oral & Maxillofacial Surgery, vol. 52: 8, ss. e60-e61.  

Björklund, G. & Swarén, M. (2014). Låt underlaget bestämma löpsteget. Svensk Idrottsforskning, : 4, ss. 8-11.  

Koptyug, A. , Bergemann, C. , Lange, R. , Jaggi, V. , Rännar, L. & Nebe, J. B. (2014). Osteoblast Ingrowth into Titanium Scaffolds made by Electron Beam Melting. Materials Science Forum, vol. 783-786, ss. 1292-1297.  

Sukhovey, Y. , Koptyug, A. , Petrov, S. A. , Dotsenko, E. L. & Fisher, T. A. (2014). Psycho-immune Partnership in the Dynamic Responses of Living Systems. International Journal of Life Science and Medical Research, vol. 4: 5, ss. 57-50.    

Ainegren, M. , Carlsson, P. , Laaksonen, M. S. & Tinnsten, M. (2014). The influence of grip on oxygen consumption and leg forces when using classical style roller skis. Scandinavian Journal of Medicine and Science in Sports, vol. 24: 2, ss. 301-310.  

Koptyug, A. , Rännar, L. , Bäckström, M. , Fager Franzén, S. & Dérand, P. (2013). Additive Manufacturing Technology Applications Targeting Practical Surgery. International Journal of Life Science and Medical Research, vol. 3: 1, ss. 15-24.    

Ainegren, M. , Carlsson, P. & Tinnsten, M. (2013). An experimental study to compare the grip of classical style roller skis with on-snow skiing. Sports Engineering, vol. 16: 2, ss. 115-122.  

Stöggl, T. , Björklund, G. & Holmberg, H. (2013). Biomechanical determinants of oxygen extraction during cross-country skiing. Scandinavian Journal of Medicine and Science in Sports, vol. 23: 1, ss. e9-e20.  

Tesch, P. , Pozzo, M. , Ainegren, M. , Swarén, M. & Linnehan, R. M. (2013). Cardiovascular responses to rowing on a novel ergometer designed for both resistance and aerobic training in space. Aviation, Space and Environmental Medicine, vol. 84: 5, ss. 516-521.  

Elmer, S. , Danvind, J. & Holmberg, H. (2013). Development of a novel eccentric arm cycle ergometer for training the upper body. Medicine & Science in Sports & Exercise, vol. 45: 1, ss. 206-211.  

Troynikov, O. , Wardiningsih, W. , Koptyug, A. , Watson, C. & Oggiano, L. (2013). Influence of Material Properties and Garment Composition on Pressure Generated by Sport Compression Garments. Procedia Engineering, vol. 60, ss. 157-162.  

Sundström, D. , Carlsson, P. , Ståhl, F. & Tinnsten, M. (2013). Numerical optimization of pacing strategy in cross-country skiing. Structural and multidisciplinary optimization (Print), vol. 47: 6, ss. 943-950.    

Cronskär, M. , Rännar, L. & Bäckström, M. (2013). Production of Customized Hip Stem Prostheses : a Comparison Between Machining and Additive Manufacturing. Rapid prototyping journal, vol. 19: 5, ss. 365-372.  

Ainegren, M. , Carlsson, P. , Tinnsten, M. & Laaksonen, M. S. (2013). Skiing economy and efficiency in recreational and elite cross-country skiers. Journal of Strength and Conditioning Research, vol. 27: 5, ss. 1239-1252.  

Holmberg, J. , Lund Ohlsson, M. , Supej, M. & Holmberg, H. (2013). Skiing efficiency versus performance in double-poling ergometry. Computer Methods in Biomechanics and Biomedical Engineering, vol. 16: 9, ss. 987-992.  

Koptyug, A. , Bäckström, M. , Tinnsten, M. & Carlsson, P. (2012). Cross-country ski vibrations and possible mechanisms of their influence on the free gliding. Procedia Engineering, vol. 34, ss. 473-478.    

Dérand, P. , Rännar, L. & Hirsch, J. (2012). Imaging, virtual planning, design and production of patient specific implants and clinical validation in cranio-maxillo-facial surgery. Cranial maxillofacial Trauma and Reconstruction, vol. 5: 3, ss. 137-144.  

Cronskär, M. , Rännar, L. & Bäckström, M. (2012). Implementation of digital design and solid free-form fabrication for customization of implants in trauma orthopaedics. Journal of medical and biological engineering, vol. 32: 2, ss. 91-96.  

Holmberg, L. J. & Klarbring, A. (2012). Muscle decomposition and recruitment criteria influence muscle force estimates. Multibody system dynamics, vol. 28: 3, ss. 283-289.  

Holmberg, L. J. , Ohlsson, M. & Danvind, J. (2012). Musculoskeletal simulations : a complementary tool for classification of athletes with physical impairments. Prosthetics and orthotics international, vol. 36: 3, ss. 396-397.  

Rasmussen, J. , Holmberg, L. J. , Sørensen, K. , Kwan, M. , Andersen, M. S. & De Zee, M. (2012). Performance optimization by musculoskeletal simulation. Science et Motricite, vol. 75, ss. 73-83.  

Koptyug, A. , Bäckström, M. & Rännar, L. (2012). Tin Man- Making Spare Parts for Human Body. Science First Hand, vol. 44: 2, ss. 45-57.

Björklund, G. , Laaksonen, M. & Holmberg, H. -. (2011). Blood lactate recovery and respiratory responses during diagonal skiing of variable intensity. European Journal of Sport Science, vol. 11: 5, ss. 317-326.  

Koptyug, A. , Mamontov, E. & Sukhovey, Y. (2011). Dynamic modeling of tumor development. Science First Hand, vol. 6: 42, ss. 44-51.

Laaksonen, M. , Ainegren, M. & Lisspers, J. (2011). Evidence of improved shooting precision in biathlon after 10-weeks of combined relaxation and specific shooting training. Cognitive Behaviour Therapy, vol. 40: 4, ss. 237-250.  

Stöggl, T. , Mueller, E. , Ainegren, M. , Ainegren, M. & Holmberg, H. (2011). General strength and kinetics: fundamental to sprinting faster in cross country skiing?. Scandinavian Journal of Medicine and Science in Sports, vol. 21: 6, ss. 791-803.  

Carlsson, P. , Tinnsten, M. & Ainegren, M. (2011). Numerical Simulation of Cross Country Skiing. Computer Methods in Biomechanics and Biomedical Engineering, vol. 14: 8, ss. 741-746.  

Koptyug, A. , Mamontov, E. & Sukhovey, Y. (2011). Towards personalised medicine : Problems of the drug therapy of cancer. Science First Hand, vol. 38: 2, ss. 91-97.

Björklund, G. , Stöggl, T. & Holmberg, H. (2010). Biomechanical influenced differences in O₂ extraction in diagonal skiing: arm versus leg. Medicine & Science in Sports & Exercise, vol. 42: 10, ss. 1899-1908.  

Laaksonen, M. , Björklund, G. , Heinonen, I. , Kemppainen, J. , Knuuti, J. , Kyröläinen, H. & Kalliokoski, K. (2010). Perfusion heterogeneity does not explain excess muscle oxygen uptake during variable intensity exercise. Clinical Physiology and Functional Imaging, vol. 30: 4, ss. 241-249.  

Kuzmin, L. , Carlsson, P. & Tinnsten, M. (2010). The relationship between the type of machining of the ski running surface and its wettability and capillary drag. Sports Technology, vol. 3: 2, ss. 121-130.  

Ainegren, M. , Ainegren, M. , Carlsson, P. & Tinnsten, M. (2009). Roller ski rolling resistance and its effects on elite athletes’ performance. Sports Engineering, vol. 11: 3, ss. 143-157.  

Piotrowska, M. , Mamontov, E. , Peterson, A. & Koptyug [Koptioug], A. (2008). A model and simulation for homeorhesis in the motion of a single individual. Mathematical and computer modelling, vol. 48: 7-8, ss. 1122-1143.  

Holmberg, J. & Lund, M. (2008). A Musculoskeletal Full‐body Simulation of Cross‐Country Skiing. Proceedings of the Institution of Mechanical Engineers, Part P, vol. 222: P1, ss. 11-22.  

Svoboda, A. , Tatar, K. , Norman, P. & Bäckström, M. (2008). Integrated approach for prediction of stability limits for machining with large volumes of material removal. International Journal of Production Research, vol. 46: 12, ss. 3207-3222.  

Sidén, J. , Fein, M. , Koptyug, A. & Nilsson, H. (2008). Logos as RFID Tag Antennas. International Journal on Wireless and Optical Communications RFID special issue, vol. 5: 1, ss. 85-96.

Ainegren, M. , Ainegren, M. , Carlsson, P. & Tinnsten, M. (2008). Rolling resistance for treadmill roller skiing. Sports Engineering, vol. 11: 1, ss. 23-29.  

Rännar, L. , Glad, A. & Gustafson, C. (2007). Efficient cooling with tool inserts manufactured by electron beam melting. Rapid prototyping journal, vol. 13: 3, ss. 128-135.  

Nilsson, H. , Sidén, J. , Olsson, T. , Jonsson, P. & Koptoiug, A. (2007). Evaluation of a printed patch antenna for robust microwave RFID tags. IET Microwaves, Antennas & Propagation, vol. 1: 3, ss. 776-781.  

Carlsson, P. & Tinnsten, M. (2007). Geometrical compensation for varying material properties in bows by the use of numerical optimization. Acta Acoustica united with Acustica, vol. 93: 1, ss. 145-151.

Björklund, G. , Pettersson, S. & Schagatay, E. (2007). Performance predicting factors in prolonged exhausting exercise of varying intensity. European Journal of Applied Physiology, vol. 99: 4, ss. 423-429.  

Sidén, J. , Fein, M. , Koptioug, A. & Nilsson, H. (2007). Printed Antennas with Variable Conductive Ink Layer Thickness. IET Microwaves, Antennas & Propagation, vol. 1: 2, ss. 401-407.  

Norman, P. , Bäckström, M. , Rantatalo, M. , Svoboda, A. & Kaplan, A. (2006). A sophisticated platform for characterization, monitoring and control of machining. Measurement science and technology, vol. 17: 4, ss. 847-854.  

Holmberg, H. , Lindinger, S. , Stöggl, T. , Björklund, G. & Muller, E. (2006). Contribution of the legs to double-poling performance in elite cross country skiers. Medicine & Science in Sports & Exercise, vol. 38: 10, ss. 1853-1860.  

Kuzmin, L. & Tinnsten, M. (2006). Dirt absorption on the ski running surface - quantification and influence on the gliding ability. Sports Engineering, vol. 9: 3, ss. 137-146.  

Koptyug, A. , Ananiev, L. & Äström, J. (2006). How to Make Perfect Snow. Science First Hand, : 1 (7), ss. 122-133.  

Bäckström, M. , Koptioug, A. & Tinnsten, M. (2006). People and Skis. Science-First Hand, : 3, ss. 110-125.  

Mamontov, E. , Psiuk-Maksymowicz, K. & Koptioug, A. (2006). Stochastic mechanics in the context of the properties of living systems. Mathematical and computer modelling, vol. 44: 7-8, ss. 595-607.  

Mamontov, E. , Koptioug, A. & Psiuk-Maksymowicz, K. (2006). The minimal, phase-transition model for the cell-number maintenance by the hyperplasia-extended homeorhesis. Acta Biotheoretica, vol. 54: 2, ss. 61-101.  

Richardson, M. , de Bruijn, R. , Holmberg, H. , Björklund, G. , Haughey, H. & Schagatay, E. (2005). Increase of hemoglobin concentration after maximal apneas in divers, skiers and untrained humans. Canadian Journal of Applied Physiology, vol. 30: 3, ss. 276-281.

Olsson, T. , Sidén, J. & Koptioug, A. (2005). Robustness comparison of bow-tie and dipole antennas. IEE Proceedings - Microwaves Antennas and Propagation, vol. 151: 6, ss. 525-529.  

Olsson, T. & Koptioug, A. (2005). Statistical analysis of antenna robustness. IEEE Transactions on Antennas and Propagation, vol. 53: 1, ss. 566-568.  

Mamontov, E. , Psiuk-Maksymowicz, K. & Koptioug, A. (2005). What Stochastic Mechanics is Relevant to the Study of Living Systems?. Proceedings of the Latvian Academy of Sciences. Section B, vol. 59: 6 (641), ss. 255-262.  

Havila, V. , Johanson, J. & Thilenius, P. (2004). International business-relationship triads. International Marketing Review, vol. 21: 2, ss. 172-186.  

Tinnsten, M. , Dahlén, L. , Holmberg, J. & Holmberg, H. C. (2004). Projekt Davos : hjälper längdlandslaget att åka fortare. Svensk Idrottsforskning, vol. 13: 1, ss. 25-27.

Bäckström, M. & Wiklund, H. (2004). QFD as a tool to improve quality control in a complex manufacturing environment. The Asian Journal on Quality, vol. 5: 1, ss. 10-22.

Djalili-Moghaddam, M. & Ebrahimzadeh, P. R. (2004). Study of geometry effects in torsional rheometry of fibre suspensions. Rheologica Acta, vol. 44: 44, ss. 29-37.  

Holmberg, H. & Björklund, G. (2004). Vintersportcentrum : En resurs för utveckling och uppföljning av olympiska vintergrenar. Svensk Idrottsforskning: organ för Centrum för idrottsforskning, : 1, ss. 10-14.

Geldart, M. , Webb, P. , Larsson, H. , Bäckström, M. , Gindy, N. & Rask, K. (2003). A direct comparison of the machining performance of a variax 5 axis parallel kinetic machining centre with conventional 3 and 5 axis machine tools.. International journal of machine tools & manufacture, vol. 43: 11, ss. 1107-1116.

Carlsson, P. & Tinnsten, M. (2003). A distributed computing system used for concurrent optimization methods on a violin top. Structural and multidisciplinary optimization (Print), vol. 25: 5/6, ss. 453-458.  

Koptioug, A. , Foster, M. , Grigor’ev, I. , Lurie, D. , Khramtsov, V. , McCallum, S. , Panagiotelis, I. & Nicholson, I. (2003). In Vivo Detection of a pH-Sensitive Nitroxide in the Rat Stomach by Low-Field ESR-Based Techniques. Magnetic Resonance in Medicine, vol. 49: 3, ss. 558-567.  

Dahlén, L. & Carlsson, P. (2003). Numerical optimization of a distributor valve. International Journal of Fluid Power, vol. 4: 3, ss. 17-25.

Carlsson, P. & Tinnsten, M. (2003). Optimization of a violin top with a combined laminate and honeycomb model of the wood material. Holzforschung, vol. 57: 1, ss. 101-105.  

Koptioug, A. (2002). Application of the Time-Variable Feedback to the Input Amplifiers of Pulse Magnetic Resonance Spectrometers : Theoretical Considerations. Applied Magnetic Resonance, vol. 22: 22/4, ss. 513-537.

Koptioug, A. , Reijerse, E. & Klaassen, A. A. K. (2002). Application of Time-Variable Feedback to the Input Amplifier of Pulse Magnetic Resonance Spectrometers : Experimental Studies. Applied Magnetic Resonance, vol. 22: 4, ss. 455-473.  

Tinnsten, M. & Carlsson, P. (2002). Numerical optimization of violin top plates. Acta Acoustica united with Acustica, vol. 88, ss. 278-285.

Carlsson, P. & Tinnsten, M. (2002). Optimization of Drying Schedules Adapted for a Mixture of Bords with Distribution of Sapwood and Heartwood. Drying Technology, vol. 20: 2, ss. 403-418.  

Hemp, J. , Sanderson, M. L. , Koptioug, A. , Liang, B. , Sweetland, D. J. & Al Rabeh, L. H. (2002). Problems in the Theory and Design of Electromagnetic Flowmeters for Dielectric Fluids : Part 1: Experimental Assessment of Static Charge Noise Levels and Signal-to-Noise Ratio. Flow Measurement and Instrumentation, vol. 13: 4, ss. 143-145.  

Tinnsten, M. , Carlsson, P. , Jonsson, M. & Jonsson, M. (2002). Stochastic optimization of acoustic response : a numerical and experimental comparison. Structural and multidisciplinary optimization (Print), vol. 23: 6, ss. 405-411.  

Carlsson, P. (2001). Distributed optimization with a two-dimensional drying model of a board, built up by sapwood and heartwood. Holzforschung, vol. 55: 4, ss. 426-432.  

Tinnsten, M. , Jonsson, M. & Johansson, O. (2001). Prediction and verification of acoustic radiation. Acustica - Acta Acustica, vol. 87: 1, ss. 117-127.

Dahlén, L. & Isaksson, O. (2001). Vegetable and synthetic hydraulic fluids to improve the overall efficiency of a hydrostatic transmission. Journal of Synthetic Lubrication, vol. 17: 4, ss. 263-276.  

Ebrahimzadeh, R. (2000). Neutrophil chemotaxis in moving gradients of fMLP. JOURNAL OF LEUKOCYTE BIOLOGY, vol. 67: 5, ss. 651-661.

Tinnsten, M. (2000). Optimization of acoustic response : a numerical and experimental comparison. Structural and multidisciplinary optimization (Print), vol. 19: 2, ss. 122-129.  

Carlsson, P. & Arfvidsson, J. (2000). Optimized wood drying. Drying Technology, vol. 18: 8, ss. 1779-1796.  

Tinnsten, M. , Esping, B. & Jonsson, M. (1999). Optimization of acoustic response. Structural Optimization, vol. 18: 1, ss. 36-47.  

Ebrahimzadeh, R. (1999). The initiation of the neutrophil chemotactic response in filters. Journal of Leukocyte Biology, vol. 66: 1, ss. 90-94.

Ebrahimzadeh, P. & McQueen, D. (1998). A model of the dynamic mechanical responses of wood, paper and some polymers to moisture changes. Journal of Materials Science, vol. 33: 5, ss. 1201-1209.

Bäckström, M. & Wiklund, H. (1998). Development of a multi-tooth approach to tool condition monitoring in milling. Insight (Northampton), vol. 40: 8, ss. 548-552.

Ebrahimzadeh, P. (1998). Effect of impregnation on mechanosorption in wood and paper studied by dynamic mechanical analysis. Wood Science and Technology, vol. 32: 2, ss. 101-118.

Ebrahimzadeh, R. & Braide, M. (1998). Neutrophil chemotaxis is preceded by a 15-20 minute adaptation phase of random migration. JOURNAL OF LEUKOCYTE BIOLOGY, vol. 1, ss. 23-32.

Koptioug, A. (1998). New Transmission Line Resonators for ESE. EPR Newsletter, vol. 9: 3, ss. 20-22.

Carlsson, P. , Esping, B. , Dahlblom, O. , Ormarsson, S. & Söderström, O. (1998). Optimization, a tool with which to create an effective drying schedule. Holzforschung, vol. 52: 5, ss. 530-540.

Ebrahimzadeh, P. & Kubat, J. (1997). Mechanosorptive effects in cellophane, polyamide 6 and some other polymers studied by dynamic mechanical analysis. Journal of Materials Science, vol. 32: 16, ss. 4227-4235.

Koptioug, A. , Reijerse, E. & Klaassen, A. K. (1997). New Transmission-Line Resonator for Pulsed EPR. Journal of magnetic resonance, : 125, ss. 369-371.  

Koptyug, A. (1997). Optical Detection of EPR Spectra of Radical-Ion Pairs in Weak Magnetic Fields. Doklady Akademii Nauk, vol. 297: 6, ss. 1414-1417.  

Carlsson, P. & Esping, B. (1997). Optimization of the wood drying process. Structural Optimization, vol. 14: 4, ss. 232-241.  

Ebrahimzadeh, P. , Bazargani, F. , Afzal, F. , Hogfors, C. & Braide, M. (1996). A subpopulation analysis of f-MLP stimulated granulocytes migrating in filters. Biorheology, vol. 33: 3, ss. 231-250.

Ebrahimzadeh, P. , Kubat, J. & McQueen, D. (1996). Dynamic mechanical characterization of mechanosorptive effects in wood and paper. European Journal of Wood and Wood Products, vol. 54: 4, ss. 263-271.

Carlsson, P. , Tinnsten, M. & Esping, B. (1995). Optimization of a racing ski : Brief notes. Structural Optimization, vol. 10: 1, ss. 61-63.  

Koptyug, A. & Sörman, E. (1994). A Method of Altering the Modulation Type and frequency of Commercial ESR Spectrometers :  . Measurement science and technology, vol. 5: 7, ss. 797-780.  

Ebrahimzadeh, P. , Braide, M. , Strid, K. & Bjursten, L. (1994). MIGRATION OF HUMAN GRANULOCYTES IN FILTERS - EFFECTS OF GRAVITY AND MOVABLE GRADIENTS OF F-MLP. Biorheology, vol. 31: 6, ss. 617-630.

Koptyug, A. & Grishin, Y. (1994). S-band magnetron-based accessory for optical detection of ESR spectra of radiation-induced radical-ion pairs. Measurement science and technology, vol. 5: 4, ss. 363-370.  

Ebrahimzadeh, P. & Kubat, D. (1993). EFFECTS OF HUMIDITY CHANGES ON DAMPING AND STRESS-RELAXATION IN WOOD. Journal of Materials Science, vol. 28: 20, ss. 5668-5674.

Koptioug, A. , Antzutkin, O. , Lindgren, M. & Lund, A. (1993). Optically detected ESR (OD ESR) of radical-ion pairs in coloured solutions : Observation of transient Trans-Azobenzene Radical Cation. Applied Magnetic Resonance, vol. 5: 1, ss. 77-86.  

Morozov, V. A. , Koptyug, A. , Doktorov, A. B. & Molin, Y. (1992). Dynamic theory of optically detected electron-nuclear double resonance of radical pairs (OD ENDOR) in liquid solutions. Chemical Physics, vol. 165: 2-3, ss. 297-312.

Morozov, V. A. , Antzutkin, O. , Koptyug, A. & Doktorov, A. B. (1991). Multiquantum resonances in low-field optically detected ESR of radical-ion pairs. Molecular Physics, vol. 73: 3, ss. 517-540.  

Koptioug, A. , Saik, V. , Anisimov, O. , Molin, Y. & Antzutkin, O. (1990). Effect of External Magnetic Fields and Resonance Radio frequency Radiation on Radical Reactions. Physica. B, Condensed matter, vol. 164: 1-2, ss. 200-204.  

Koptioug, A. , Saik, V. , Anisimov, O. & Molin, Y. (1990). Quantum beats in singlet-triplet transitions of radical pairs induced by a radio-frequency field. Chemical Physics Letters, vol. 165: 2-3, ss. 142-145.  

Koptyug, A. , Saik, V. , Anisimov, O. & Molin, Y. (1989). Spin-locking in concentration-narrowed OD ESR spectra. Chemical Physics, vol. 138: 1, ss. 173-178.  

Koptyug, A. (1988). Weak Field ESR Spectrometer. Transactions of Siberian Branch of the USSR Academy of Sciences, vol. 1, ss. 121-124.

Koptyug, A. (1987). Optical Detection of the Radical-Ion Pair Spectra in Weak Magnetic Fields. Doklady Akademii Nauk, vol. 297: 6, ss. 1414-1418.  

Molin, N. , Tinnsten, M. , Wiklund, U. & Jansson, E. V. (1986). A violin maker's practical test of wood properties suggested from FEM-analysis of an orthotropic shell. Journal of the Catgut Acoustical Society, vol. 46, ss. 24-29.

Koptyug, A. , Rännar, L. & Bäckström, M. (). Multiscale surface structuring of the biomedical implants manufactured in Electron Beam Melting technology : Demands, advances and challenges. ,

Artiklar, forskningsöversikter

Greenslade, D. , Koptyug, A. & Symons, M. (1995). Aspects of low-frequency low-field electron spin resonance. Royal Society of Chemistry. Annual Reports on the Progress of Chemistry. Section C: Physical Chemistry, vol. 92, ss. 3-21.  

Doktorsavhandlingar

Dahlén, L. (2003). Numerical and experimental study of performance of a hydraulic motor. Diss. Luleå : Luleå tekniska universitet, 2003 (Doctoral thesis / Luleå University of Technology : 2003:26)

Tinnsten, M. (1999). Numerical and experimental study of acoustic and structural optimization. Diss. Luleå : Luleå Tekniska Universitet, 1999 (Doctoral theses / Luleå University of Technology : 1999:04)

Bäckström, M. (1999). On Monitoring and Control of Machining Processes. Diss. Luleå : , 1999 (Doctoral Thesis : 1999:11)

Doktorsavhandlingar, sammanläggningar

Sundström, D. (2016). Numerical optimization of pacing strategies in locomotive endurance sports. Diss. (Sammanläggning) Östersund : Mid Sweden University, 2016 (Mid Sweden University doctoral thesis : 237)  

Cronskär, M. (2014). On customization of orthopedic implants - from design and additive manufacturing to implementation. Diss. (Sammanläggning) Sundsvall, Sweden : Kopieringen, Mid Sweden University, 2014 (Mid Sweden University doctoral thesis : 191)  

Ainegren, M. (2012). Roller skis' rolling resistance and grip characteristics : influences on physiological and performance measures in cross-country skiers. Diss. (Sammanläggning) Östersund : Mid Sweden University, 2012 (Mid Sweden University doctoral thesis : 125)  

Kuzmin, L. (2010). Interfacial kinetic ski friction. Diss. (Sammanläggning) Östersund : Mittuniversitetet, 2010 (Mid Sweden University doctoral thesis : 88)  

Björklund, G. (2010). Metabolic and Cardiovascular Responses During Variable Intensity Exercise. Diss. (Sammanläggning) Sundsvall : Mittuniversitetet, 2010 (Mid Sweden University doctoral thesis : 86)  

Rännar, L. (2008). On Optimization of Injection Molding Cooling. Diss. (Sammanläggning) Trondheim : , 2008 (Doctoral thesis at NTNU : 2008:113)

Carlsson, P. (2000). Optimized Wood Manufactoring with Main Focus on Wood Drying. Diss. (Sammanläggning) Stockholm : Tekniska Högskolan, 2000 (Trita-BYMA : 2000:1)

Kapitel i böcker, del av antologier

Björklund, G. , Elgh, T. & Styfberg, P. (2018). Fysiologi och träningslära. I Specialidrott : Tränings- och tävlingslära. SISU Idrottsböcker. S. 27-72.

Björklund, G. & Lindberg, T. (2018). Tester och mätmetoder. I Specialidrott : Tränings- och tävlingslära. SISU Idrottsböcker. S. 73-80.

Björklund, G. (2018). Tävlingslära. I Specialidrott : Tränings- och tävlingslära. SISU Idrottsböcker. S. 81-88.

Carlsson, P. , Ainegren, M. , Tinnsten, M. , Sundström, D. , Esping, B. , Koptioug, A. & Bäckström, M. (2015). Cross-Country Ski. I The Engineering Approach to Winter Sports. Springer. S. 107-152.  

Ainegren, M. , Rännar, L. , Carlsson, P. & Tinnsten, M. (2013). The multifunctional roller ski. I Science and Nordic Skiing II. University of Salzburg, University of Jyväskylä. S. 253-261.

Jensen, K. , Höök, M. , Wedholm, L. , Björklund, G. & Holmberg, H. (2012). How work economy changes during a summer season with roller skiing training and its influence on performance. I Science and Skiing V. Meyer & Meyer Sport. S. 523-529.

Kuzmin, L. , Dahlén, L. , Ebrahimzadeh, R. & Wiklund, H. (2009). Comparison of Ski Running Surfaces Machined by Various Stone Grinding Equipments. I The Impact of Technology on Sport III. Melbourne, Australia : RMIT University. S. 27-31.

Bäckström, M. , Kuzmin, L. , Rännar, L. & Wiklund, H. (2009). Critical Factors Influencing Loss of Time after Shooting - A Case Study Performed During the 2008 IBU Biathlon World Championships. I The Impact of Technology on Sport III.. S. 33-37.

Kuzmin, L. & Tinnsten, M. (2007). The contamination, wettability and gliding ability of ski running surfaces. I Science and Nordic Skiing. Oxford : Meyer & Meyer Sport. S. 340-.

Kuzmin, L. & Tinnsten, M. (2005). Contact angels on the running surface of cross-country skis. I The Impact of Technology on Sport. Melbourne : Australasian Sports Technology Alliance Pty Ltd. S. 318-323.

Konferensbidrag

Petrone, N. , Carraro, G. , Dal Castello, S. , Broggio, L. , Koptioug, A. & Bäckström, M. (2018). A Novel Instrumented Human Head Surrogate For The Impact Evaluation Of Helmets. I Proceedings, Volume 2, ISEA 2018.. S. 269-    

Sundström, D. , Carlsson, P. & Andersson, E. (2018). Comparison of Power Output Estimates in Treadmill Roller-Skiing. I Proceedings. Basel :    

Petrone, N. , Giacomin, M. , Koptioug, A. & Bäckström, M. (2018). Racing Wheels’ Effect on Drag/Side Forces Acting on a Cyclist at Sportstech-Miun Wind Tunnel. I Proceedings, Volume 2, ISEA 2018.. S. 210-    

Koptioug, A. , Bäckström, M. , Ainegren, M. & Nilsson, K. (2018). Studying Moisture Transport Trough "Active" Fabrics Using Humidity-Temperature Sensor Nodes. I Proceedings, Volume 2, ISEA 2018 : .. S. 230-    

Koptioug, A. , Bäckström, M. & Rännar, L. (2017). 3D-printing: a future “magic wand” for global manufacturing. How can we benefit from it today for sports and health care?. I Proceedings of the 5th International Congress on Sport Sciences Research and Technology Support, icSPORTS.

Roos, S. , Rännar, L. , Koptioug, A. & Danvind, J. (2017). Characterization of 316ln lattice structures fabricated via electron beam melting. I Materials Science and Technology Conference and Exhibition 2017, MS and T 2017.. S. 336--343.  

Klingvall Ek, R. , Bäckström, M. & Rännar, L. (2017). Fatigue properties of Ti-6Al-4V manufactured using electron beam melting. I Euro PM2017 Proceedings. Brussels :

Lund Ohlsson, M. , Danvind, J. & Holmberg, L. J. (2017). LUMBAR SPINE REACTION FORCES IN SEATED PARA-SPORT: CROSS-COUNTRY SIT-SKIING. I Brisbane 2017 : Abstract book.  

Elgh, T. , Lindberg, T. & Björklund, G. (2017). Metabolic response during submaximal and maximal ergometer tests in elite sprint kayakers. Paper presented at the The 22nd Annual Congress of the European College of Sport Science in MetropolisRuhr, 5-8 July 2017, Essen, Germany

Koptyug, A. , Rännar, L. & Bäckström, M. (2017). New Materials for Additive Manufacturing in Metal: Back to Basics?. Paper presented at the Frontiers in Materials Processing Applications, Research and Technology, FiMPART-2017, Bordeaux, France, July 9-12, 2017

Björklund, G. , Born, D. , Stöggl, T. & Swarén, M. (2017). Performance analysis of trail running in undulating terrain. Paper presented at the BASES-FEPSAC Conference, Nottingham, UK, 28-29 November 2017

Hirsch, J. , Dérand, P. , Gamstedt, K. , Huo, J. , Omar, O. , Palmquist, A. , Thor, A. , Nysjö, F. & et al. (2016). 3D printed titanium implants i Maxillofacial surgery. Paper presented at the 12th International Bernd-Spiessl Symposium, Basel, June 16-18, 2016

Bäckström, M. , Carlsson, P. , Danvind, J. , Koptioug, A. , Sundström, D. & Tinnsten, M. (2016). A New Wind Tunnel Facility Dedicated to Sports Technology Research and Development. I Procedia Engineering. (Procedia Engineering). S. 62--67.    

Fisher, T. A. , Petrov, S. A. , Koptyug, A. , Sukhovey, Y. G. & Dotsenko, E. L. (2016). A way to health through psycho-immunological wellbeing : Example of Indigenous People of Russian North. I Proc. IIId Intl Conference "Psychological Health of the Person: Life Resource and Life Potential".  

Chudinova, E. , Surmeneva, M. , Koptioug, A. , Skoglund, P. & Surmenev, R. (2016). Additive manufactured Ti6Al4V scaffolds with the RF-magnetron sputter deposited hydroxyapatite coating. I Journal of Physics: Conference Series.    

Leicht, A. , Vattur Sundaram, M. , Yao, Y. , Hrhya, E. , Nyborg, L. , Rännar, L. , Koptyug, A. , Frisk, K. & et al. (2016). As-HIP Microstructure of EBM Fabricated Shell Components. I Proceedings of Wolrd PM2016 - AM - Properties of Lightweight Materials ll.

Vranceanu, D. , Koptioug, A. , Vladescu, A. , Braic, M. , Surmenev, R. , Surmeneva, M. , Berbecaru, A. & Cotrut, C. (2016). Biofunctionalization of porous Ti6Al4V with HAp coatings obtained by electrochemical assisted deposition. I Proc. 7 th International Conference “Biomaterials, Tissue Engineering & Medical Devices” BIOMMEDD’2016.

Frisk, K. , Rännar, L. , Koptyug, A. , Petterson, N. , Persson, D. , Leicht, A. , Vattur Sundaram, M. , Hrhya, E. & et al. (2016). Characterisation Of EBM-built Shelled Samples of Ti6Al4V Compacted by HIP. Paper presented at the World Powder Metallurgy Congress, Hamburg, Germany, October 9-13, 2016

Leicht, A. , Shvab, R. , Hrhya, E. , Nyborg, L. & Rännar, L. (2016). Characterization of virgin and recycled 316L powder used in additive manufacturing. Paper presented at the 7th International Swedish Production Symposium, Lund, 25th - 27th of October, 2016

Cronskär, M. , Rännar, L. , Hamberg, Å. , Samuelsson, B. & Nilsson, K. G. (2016). Custom design and additive manufacturingof orthopedic implants and medical models in titanium and plastics. Paper presented at the Bernd-Spiessel Symposium, Basel, Switzerland, June 16-18, 2016

Cronskär, M. , Legrell, P. , Tidehag, P. & Rännar, L. (2016). Dental Implant Manufacturing using Electron Beam Melting – Geometry Deviation from Intraoral Scanning and from Cone Beam Computed Tomography. I EBAM 2016 : 1st International Conference on Electron Beam Additive Manufacturing.  

Cronskär, M. , Legrell, P. , Tidehag, P. & Rännar, L. (2016). Dental Implant Manufacturing using Electron Beam Melting – Geometry Deviation from Intraoral Scanning and from Cone Beam Computed Tomography. Paper presented at the Odontologisk riksstämma, Älvsjö, Sweden, 16-18 November, 2016

Andersson, E. , Holmberg, H. , Ørtenblad, N. & Björklund, G. (2016). Energy contributions and pacing strategies of elite XC skiers during sprint skiing. Paper presented at the ICSS 2016 - International Congress on Science and Skiing, Arlberg, Austria, 10-15th December, 2016

Swarén, M. , Stöggl, T. , Kalmendal, C. & Björklund, G. (2016). How do custom made insoles affect the pressure distribution under the feet in alpine skiing?. Paper presented at the ICSS 2016 - International Congress on Science and Skiing, St. Christoph, Austria, 10-15 December, 2016

Koptyug, A. , Ainegren, M. , Bäckström, M. , Schieber, E. & Persson, J. (2016). Possibility of modern humidity sensor application in the studies ofmoisture transport through the sports and outdoor garments. I icSPORTS 2016 - Proceedings of the 4th International Congress on Sport Sciences Research and Technology Support. Portugal : (Scitepress Digital Library). S. 51--58.  

Björklund, G. & Swarén, M. (2016). Required shooting efficiency to win World Cup and World Championship Biathlon races during the 2015-2016 season. Paper presented at the ISPAS World Congress of Performance Analysis of Sport XI, 16-18 November, Alicante, Spain

Chudinova, E. , Surmeneva, M. , Koptioug, A. , Sharonova, A. , Loza, K. & Surmenev, R. (2016). Surface modification of additive manufactured Ti6Al4V alloy with Ag nanoparticles : Wettability and surface morphology study. I IOP Conference Series : Materials Science and Engineering.  

Surmenev, R. , Surmeneva, M. , Chudinova, E. , Koptioug, A. , Melnikova, E. , Skoglund, P. , Prymak, O. , Epple, M. & et al. (2016). Surface modification of additive manufactured titanium with CaP, Ag nanoparticles and ultrathin HA coating. I Proceedings BIOMAH-2016.

Swarén, M. , Larsson, O. & Björklund, G. (2016). Using telecasting to identify key performance indicators in alpine skiing and evaluate the inter-analyst reliability of alpine ski coaches. Paper presented at the ICSS 2016 - International Congress on Science and Skiing, 10-15 December, 2016, St. Cristoph, Austria.

Swarén, M. , Larsson, O. & Björklund, G. (2016). Using telecasting to identify turn times in alpine skiing. Paper presented at the ISPAS International Workshop, Institute of Technology Carlow, 22-23 March

Rännar, L. , Koptyug, A. , Bäckström, M. & Jönsson, A. (2016). Water jet polishing of materials manufactured with electron beam melting technology. Paper presented at the World Powder Metallurgy Congress, Hamburg, Germany, 9-13 October, 2016

Sundström, D. , Bäckström, M. , Carlsson, P. & Tinnsten, M. (2015). A four compartment model on human exercise bioenergetics. I Procedia Engineering. (Procedia Engineering). S. 4--9.    

Andersson, F. , Skoglund, P. , Viktorsson, J. & Ainegren, M. (2015). A Portable Douglas Bag System. I Congress Proceedings : ICSNS 2015.. S. 59-

Wikman, S. , Shen, Z. , Rännar, L. , Obitz, C. & Öijerholm, J. (2015). Assessment of additive manufacturing of 316L(N)-IG for In-Vessel components and performance of CuCrZr at coolant water interfaces. Paper presented at the 17th International Conference on Fusion Reactor Materials (ICFRM-17), Aachen, Germany, 12-16 October, 2015.

Swarén, M. , Born, D. , Stöggl, T. & Björklund, G. (2015). Biomechanical 3D field measurements of trail runners. Paper presented at the 20th Annual Congress of the European College of Sport Science, 2015, Malmö, Sweden.

Koptyug, A. & Ainegren, M. (2015). Experimental measurement of rifle dynamics during the range shooting of biathlon weapons. I Procedia Engineering : The Impact of Tecnology on Sport VI.. S. 349--354.    

Chudinova, E. , Surmeneva, M. , Koptyug, A. , Skoglund, P. , Sharanova, A. , Loza, K. , Epple, M. & Surmenev, R. (2015). Hydroxyapatite coating and silver nanoparticles assemblies on additively manufactured Ti6Al4V scaffolds. Paper presented at the Local conference, Tomsk Polytechnic University, Tomsk, Russia  

Surmeneva, M. , Chudinova, E. , Syrtanov, M. , Koptyug, A. & Surmenev, R. (2015). Investigation of the HA film deposited on the porous Ti6Al4V alloy prepared via additive manufacturing. I IOP Conference Series: Materials Science and Engineering. IOP : . S. Art. no. 012025-    

Born, D. , Stöggl, T. , Swarén, M. , Sperlich, B. & Björklund, G. (2015). Is heart rate a valid measure to monitor exercise intensity during trail running in undulating terrain?. Paper presented at the 20th Annual Congress of the European College of Sport Science, 2015, Malmö, Sweden.  

Sundström, D. , Bäckström, M. , Carlsson, P. & Tinnsten, M. (2015). Optimal distribution of power output and braking for corners in road cycling. Paper presented at the Science and Cycling, Utrecht 1-2 July 2015  

Kårström, A. & Björklund, G. (2015). The effect of carbohydrate mouth rinse on simulated XC-sprint performance. Paper presented at the 20th Annual Congress of the European College of Sport Science, 2015, Malmö, Sweden.

McGawley, K. , Platt, S. , Beaven, M. & Björklund, G. (2015). The validity and reliability of a four-minute running time trial in assessing VO₂max and performance. Paper presented at the Endurance Research Conference

Swarén, M. , Soehnlein, Q. , Holmberg, M. , Stöggl, T. & Björklund, G. (2015). Using 3D motion capture to analyze ice-hockey shooting technique on ice. Paper presented at the 20th Annual Congress of the European College of Sport Science, 2015, Malmö, Sweden

Skoglund, P. & Rännar, L. (2014). A survey on implementation of additive manufacturing to the manufacturing process of orthopedic and orthotic appliances. Paper presented at the 5:th International Conference on Additive Technologies, Vienna, Austria, October 16-17 2014

Johansson, J. (2014). Analysing discrete event simulation modelling activities applied in manufacturing system design. I Competitive Design - Proceedings of the 19th CIRP Design Conference. (Competitive Design - Proceedings of the 19th CIRP Design Conference). S. 512--517.

Rännar, L. & Hamberg, Å. (2014). Design and manufacture of a titanium tibial reinforcement cage using electron beam melting. Paper presented at the 5:th International Conference on Additive Technologies, Vienna, Austria, 15. - 17. October 2014

Huo, J. , Hirsch, J. , Dérand, P. , Rännar, L. & Gamstedt, K. (2014). Finite element investigation of the in-vivo failure of a titanium alloy human jaw implant. Paper presented at the International Bernd-Spiessl-Symposium 2014 for Innovative and Visionary Technologies in Cranio-Maxillofacial Surgery, Basel, Switzerland, June 19-21 2014

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2014). Gliding-induced ski vibrations : Approaching proper modeling. I Procedia Engineering. (Procedia Engineering). S. 539--544.    

Sundström, D. , Tinnsten, M. & Carlsson, P. (2014). The influence of course bends on pacing strategy in road cycling. I Conference Proceedings of The Engineering of Sport 10. (Procedia Engineering). S. 835--840.  

Ainegren, M. , Carlsson, P. & Tinnsten, M. (2013). A portable roller ski rolling resistance measurement system. I The Impact of Technology on Sport V : Procedia Engineering.. S. 79--83.    

Koptyug, A. , Rännar, L. , Bäckström, M. & Langlet, r. (2013). Bulk Metallic Glass Manufacturing Using Electron Beam Melting. I Proceedings from Additive Manufacturing & 3D Printing, Nottingham, UK, July 2013. Nottingham, UK :

Lund Ohlsson, M. , Danvind, J. & Holmberg, J. (2013). Can Simulations Assist in Classification Development?. I Equipment and Technology in Paralympic Sports.

Skoglund, P. , Lund Ohlsson, M. & Danvind, J. (2013). Lower Leg Prosthesis for Cross-Country Skiing Classical Technique. Paper presented at the International Paralympic Committee VISTA2013 Scientific Conference, Bonn, 2013, Equipment & Technology in Paralympic Sports  

Cronskär, M. & Bäckström, M. (2013). Modeling of fractured clavicles and reconstruction plates using CAD, finite element analysis and real musculoskeletal forces input. I WIT Transactions on Biomedicine and Health. (WIT Transactions on Biomedicine and Health). S. 235--243.  

Wikman, S. , Cui, D. , Shen, J. , Bin, Q. & Rännar, L. (2013). ON 3D ADDITIVE MANUFACTURING ITER COMPONENTS. Paper presented at the 16th International Conference On Fusion Reactor Materials; 20-26 October, 2013; Beijing, China

Sundström, D. , Carlsson, P. & Tinnsten, M. (2013). On Optimization of Pacing Strategy in Road Cycling. I 6TH ASIA-PACIFIC CONGRESS ON SPORTS TECHNOLOGY (APCST). Melbourne : (Procedia Engineering). S. 118--123.  

Bäckström, M. , Tinnsten, M. , Koptyug, A. , Rännar, L. , Carlsson, P. , Danvind, J. & Wiklund, H. (2013). Sports Technology Education at Mid Sweden University. I 6TH ASIA-PACIFIC CONGRESS ON SPORTS TECHNOLOGY (APCST). (Procedia Engineering). S. 214--219.    

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2013). Studies into the Mechanisms of the Cross-country Ski Vibrations and Possible Models of the Phenomenon. I 6TH ASIA-PACIFIC CONGRESS ON SPORTS TECHNOLOGY (APCST). (Procedia Engineering). S. 40--45.  

Hirsch, J. , Carlbom, I. , Dérand, P. , Nysjö, F. , Nyström, I. , Olsson, P. & Rännar, L. (2013). Virtual planning, additive manufacturing of biomaterials and real time reconstructive maxillofacial surgery. Paper presented at the 27:th International College for Maxillo-Facial-Surgery (ICMFS), Bad Hofgastein, Austria, March 4-9, 2013

Neubauer, B. , Sidén, J. , Gulliksson, M. , Olofsson, C. , Koptyug, A. , Nilsson, H. & Norgren, M. (2012). A new thermally activated battery cell-based forest fire detection and monitoring system. I WIT Transactions on Ecology and the Environment. Southampton : (Ecology and the Environment). S. 113--124.  

Lund Ohlsson, M. , Stöggl, T. & Danvind, J. (2012). Asymmetry case study during skiing in the diagonal stride using a lower leg prosthesis. Paper presented at the 2nd International Congress on Science and Nordic Skiing, Vuokatti, Finland, May 28-31, 2012

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2012). Cross-country Ski Vibrations : Loaded Vs Unloaded Skis. Paper presented at the 2nd International Congress on Science and Nordic Skiing, May 28 - 31, 2012, Vuokatti, Finland

Koptyug, A. , Rännar, L. , Backstrom, M. & Klingvall, R. (2012). Electron Beam Melting : Moving from Macro- to Micro- and Nanoscale. I Materials Science Forum. Switzerland : (Materials Science Forum). S. 532--537.  

Koptyug, A. , Bäckström, M. & Tinnsten, M. (2012). Laboratory Setup for the Cross Country Ski Vibrations Measurements: Methodology and First Results. Paper presented at the 2nd International Congress on Science and Nordic Skiing, May 28 - 31, 2012, Vuokatti, Finland

Björklund, G. , Stöggl, T. & Holmberg, H. (2012). NO EXCESS VO2 DURING WHOLE-BODY HIGH INTENSITY EXERCISE IN WELL-TRAINED CROSS-COUNTRY SKIERS. I Book of Abstracts of the 17th Annual Congress of the European College of Sport Science.. S. 54--54.

Ainegren, M. , Rännar, L. , Carlsson, P. & Tinnsten, M. (2012). The multi functional roller ski. Paper presented at the ICSNS 2012, 2nd International Congress on Science and Nordic Skiing, May 28th - 31st, Vuokatti, Finland

Hirsch, J. , Rännar, L. & Gamstedt, K. (2012). Virtual planning of reconstructions, production of individualized implants and transfer of the plan to the operating room in CMF surgery. Paper presented at the 26th Congress of the International College for Maxillo-Facial Surgery (ICMFS, Canary Islands, Spain

Ek, R. , Hong, J. & Dejanovic, S. (2011). Blood coagulation on electron beam melted implant surfaces, implications for bone growth. I Proccedings of EBS 2011. Dublin :  

Ainegren, M. , Carlsson, P. & Tinnsten, M. (2011). Classical style constructed roller skis and grip functionality. I Procedia Engineering : The Impact of Technology on Sports IV. (Procedia Engineering). S. 4--9.    

Stenmark, P. , Tinnsten, M. & Wiklund, H. (2011). Customer involvement in product development: experiences from Scandinavian outdoor companies. I Procedia Engineering.. S. 583--543.    

Koptyug, A. & Kuzmin, L. (2011). Experimental field studies of the cross-country ski running surface interaction with snow. I Procedia Engineering. (Procedia Engineering). S. 23--29.    

Bäckström, M. , Rännar, L. & Kuzmin, L. (2011). Influencing factors on time-loss after shooting in Biathlon. I Moderns systems for application in Biathlon. Omck : . S. 154--159.

Petrovic, V. , Jordá, O. , Martin, A. , Rännar, L. R. & Dejanovic, S. (2011). Knowledge assisted Rapid Manufacturing, KARMA Project. Paper presented at the European Forum on Rapid Prototyping and Manufacturing (AEPR’11), Paris, France

Sundström, D. , Carlsson, P. & Tinnsten, M. (2011). Optimizing pacing strategies on a hilly track in cross-country skiing. I Procedia Engineering. (Procedia engineering). S. 10--16.    

Swarén, M. , Danvind, J. & Holmberg, H. (2010).